Jack Points on Jeep Wrangler [Proper Setup & Importance]

When changing your Jeep Wrangler’s tire or brake pads, it’s essential to lift the vehicle safely. You can achieve this by correctly positioning the jack stand at the designated jack point.

The exact placement of the jack points on Jeep Wranglers can differ based on the particular model. In general, they are commonly positioned on the driver’s side, usually behind both the front and rear wheels. However, if you don’t locate it there, explore alternative points.

Jack Points on Jeep Wrangler

Rest assured, the process of elevating a Jeep Wrangler is relatively straightforward. All you need is a clear understanding of where to locate the jack point and how to execute the process correctly.

Where to Find the Jack Points in a Jeep Wrangler:

Most Jeep Wranglers have their jack points located on the driver’s side trunk area. If you’re still unable to locate the jack point, you may find it in the rear wheel arch. In some cases, the Jeep Wrangler’s jack point can also be situated underneath the motor.

Given the various Jeep Wrangler models with different updates, finding the jack point can sometimes be a bit challenging. Nevertheless, knowing the jack point’s location is crucial, whether you intend to change a tire or access components like brake pads.

Precisely adjusting the jack stand to the jack point enables you to safely lift the vehicle, providing access to the tire and other equipment. To eliminate any uncertainty, consult your vehicle’s owner’s manual for additional guidance.

Different Types of Jacks Suitable for Jeep Wrangler:

Jeep Wrangler owners understand the importance of having a reliable jack to handle various situations, especially when off-roading. To help you make an informed choice, here are different types of jacks suitable for your Jeep Wrangler:

Floor Jacks:

These are user-friendly and safe jacks, capable of lifting your Wrangler by 3 to 15 inches, simplifying maintenance and tire changes. The Arcan floor jack is a recommended choice for its exceptional quality.

Bottle Jacks:

Smaller and more portable than floor jacks, bottle jacks are ideal for trail use. They employ hydraulic pressure to lift your Jeep. Consider the Torin 4-Ton Bottle Jack for its reliability.

Scissor Jacks:

Often included in most vehicles’ emergency kits, scissor jacks are compact, lightweight, and operate through a simple mechanical design. The Torin Big Red Scissor Jack is a dependable option.

Hi-Lift Jacks:

Designed for off-road use, especially in challenging terrain like mud or snow, hi-lift jacks feature an extended handle for lifting your Jeep high off the ground. The Hi-Lift Jack HL485, a 48-inch Red All Cast Jack, is a top choice in this category.

Your choice of jack should consider factors such as weight, size, and intended purpose. With the right jack, you’ll be well-prepared to conquer obstacles during your Jeep adventures.

Selecting the Right Jack Size for a Jeep Wrangler:

If you’re wondering about the appropriate jack size for your Jeep Wrangler, here’s some valuable information:

Based on research, a 3-ton jack is recommended, as it can lift up to 6,000 lbs, which is generally sufficient for most Jeep models. Additionally, it’s advisable to invest in at least two jack stands for added safety. Explore options at Harbor Freight, as they offer a range of quality jacks and jack stands.

The size of your jack may vary depending on factors like whether your Jeep is lifted or not. For most Wranglers, a 2-ton jack should suffice. However, if you frequently venture off-road or have a more extreme lift, you may require a 3.5-ton jack.

It’s essential to consider the load capacity in relation to the weight of your specific Jeep model. For instance, a 48-inch jack is a popular choice for lifted Jeeps, while hi-lift jacks come in various sizes, ranging from 36 inches to 60 inches for more substantial lifts.

In conclusion, your choice of jack size should align with your specific Jeep Wrangler’s characteristics and intended usage.

Read: Jeep Grand Cherokee Key Fob Not Working After Battery Change [Fix]

Jack Points for 2012 and 2013 Jeep Wranglers:

Both the 2012 & 2013 Jeep Wrangler models feature jacking points located on the axle tubes at the ends of the front and rear axles. To be more precise, position your scissor jack under the corner of the axle tube nearest to the wheel you intend to raise.

Alternatively, you can use the rear differential, positioned between the two wheels, as a lifting point. Always exercise caution when using other spots, such as front and rear cross members or pinch welds, to lift or support your vehicle.

Lastly, don’t forget to check the rear storage compartment for your jack and lug wrench.

How to Change a Tire on a Jeep Wrangler:

Whether you’re changing a tire or replacing a brake pad, understanding how to use the jack point is essential. Below is a simplified process for changing a Jeep Wrangler tire using the jack points:

  • Locate the jack point and position the jack beneath it.
  • Engage the jack’s clasp in a counterclockwise direction to lift the tire off the ground.
  • Use lug wrenches to loosen and remove all the lug nuts. Removing these nuts will allow you to pull the tire off effortlessly.
  • Reverse the previous steps to install the new tire on your Jeep Wrangler. Ensure you use the lug wrench to securely tighten each nut.

Safety Precautions When Jacking Up Your Jeep Wrangler:

When lifting your Jeep Wrangler, it’s crucial to adhere to safety precautions, especially if you’re not a seasoned professional. Here are some vital safety measures to observe:

Securely Position Jack Stands: Place jack stands on a smooth and level surface. Avoid soft, uneven, or inclined terrain to prevent your Jeep from falling or leaning.

Check Tire Pressure: Maintain balanced tire pressure on the front and rear tires. Jeep Wrangler tire pressure typically ranges from 35 to 38 PSI to ensure a safe and comfortable driving experience.

Ensure Vehicle Leveling: Lift the Wrangler with jack stands at a point that allows you to access all equipment beneath the vehicle comfortably.

Avoid Placing Objects Under Tires: When using jack stands, there’s no need to position any additional support beneath the tires.

Exercise Caution When Lowering the Jeep Wrangler: Be attentive when lowering your Wrangler and removing the jack stand to prevent damage or accidents.

In conclusion, safety is paramount when jacking up your Jeep Wrangler. Following these guidelines ensures a secure and successful operation.

In summary, understanding how to properly jack up your Jeep Wrangler, selecting the right jack, and observing safety measures are essential for efficient maintenance and tire changes. Whether you’re on or off the road, this knowledge equips you to handle these tasks with confidence. Now, you are understand the proper jack points on Jeep Wrangler and why it’s importance.

FAQs –

Q. Where do you put the jack under a Jeep Wrangler?

Answer: Place the jack under the designated jack points, typically located behind the front and rear wheels on the driver’s side of the Jeep Wrangler.

Q. How do you lift a Jeep Wrangler with a jack?

Answer: Insert the jack under the vehicle’s jack points, then use the jack’s mechanism to lift the Jeep carefully and steadily off the ground.

Q. Where do jack stands go on a Jeep?

Answer: Position jack stands under the Jeep’s frame or designated lift points, ensuring they provide stability and safety while working on the vehicle.

Read: Can You Drive a Jeep without Doors on the Highway?

Leave a Reply

Your email address will not be published. Required fields are marked *